Material Testing Technology Co. | home
ASTM A Test Fixtures | ASTM B Test Fixtures | ASTM C Test Fixtures | ASTM D Test Fixtures | ASTM E Test Fixtures | ASTM F Test Fixtures | ASTM G Test Fixtures
ASTM D Test Fixtures
Model No
|
Description
|
ASTM.D0143.00
|
METHOD OF TESTING SMALL CLEAR SPECIMENS OF TIMBER, ASTM D143
|
CLEAVAGE TESTING GRIPS .
|
|
TENSILE GRIPS (PARALLEL TO THE GRAIN) .
|
|
TENSILE GRIPS (PERPENDICULAR TO THE GRAIN) .
|
|
NAIL WITHDRAWAL TENSILE GRIP & SUBSTRATE SUPPORT FRAME
|
|
STATIC BENDING FLEXURE FIXTURE UP TO 36" SPAN WITH WOODEN LOADING NOSE AND SELF-ALIGNING SUPPORTS
|
|
SHEAR-PARALLEL-TO-GRAIN FIXTURE .
|
|
ASTM.D0198.00
|
METHOD FOR STATIC TESTS OF TIMBERS IN STRUCTURAL SIZES, ASTM D198
|
FOUR POINT FLEXURE FIXTURE FOR SMALL BEAMS - 4' ADJUSTABLE SPANS - LOAD ALIGNMENT ROCKERS - ROLLER-CURVED LOADING BLOCKS
|
|
5" DIAMETER PLATENS WITH SPHERICAL BEARING FOR COMPRESSION LOADING SHORT COLUMN WOOD SPECIMENS
|
|
ASTM.D0202.00
|
METHODS FOR SAMPLING & TESTING UNTREATED PAPER USED FOR ELECTRICAL INSULATION, ASTM D202
|
SLIDE ANGLE TESTER WITH MICRO SWITCH SHUT OFF - ANGLE FROM 0° TO 90°
|
|
ASTM.D0395.00
|
RUBBER PROPERTY-COMPRESSION SET, ASTM D395
|
COMPRESSION SET TEST FIXTURE FOR CONSTANT DEFLECTION
|
|
COMPRESSION SET TEST FIXTURE FOR CONSTANT LOAD - USING CALIBRATED SPRING
|
|
COMPRESSION SET TEST FIXTURE FOR CONSTANT LOAD - USING EXTERNAL LOADING
|
|
ASTM.D0412.00
|
RUBBER PROPERTIES IN TENSION, ASTM D412
|
SIX POSITION TENSILE SET TESTING APPARATUS
|
|
TENSILE TESTING GRIPS FOR RUBBER RING SPECIMENS (NON-ROTATING SHAFTS)
|
|
TENSILE TESTING GRIPS FOR RUBBER RING SPECIMENS (ROTATING SHAFTS)
|
|
Type 1,2,3 or 4 ring cutter tools (each)
|
|
7" by 6" vacuum holding plate (vacuum pump not included) .
|
|
SELF-CLOSING AND SELF-LOCKING KNURLED ECCENTRIC ROLLER TYPE TENSILE GRIP, 500 LB CAPACITY .
|
|
Dumbbell specimen die for rubber specimens .
|
|
ASTM.D0621.00
|
DEFORMATION OF PLASTICS UNDER LOAD, ASTM D621
|
50 TO 1000 LB COMPRESSION CONSTANT LOADING DEFORMATION TEST MACHINE .
|
|
ASTM.D0624.00
|
TEAR STRENGTH OF CONVENTIONAL VULCANIZED RUBBER & THERMOPLASTIC ELASTOMERS, ASTM D624
|
TENSILE GRIPS FOR RUBBER MATERIALS, 500 LB CAPACITY .
|
|
Tear resistance specimens, die A,B,C
|
|
ASTM.D0671.00
|
TEST METHOD FOR FLEXURAL FATIGUE OF PLASTIC , ASTM D671
|
CONSTANT SPEED SHEET FATIGUE TESTING MACHINE .
|
|
ASTM.D0695.00
|
TEST METHOD FOR COMPRESSIVE PROPERTIES OF RIGID PLASTICS, ASTM D695
|
COMPRESSION ANTI-BUCKLING FIXTURE - AS SHOWN IN ASTM D695 - NO SUPPORT JIG (S.S.) .(SEE SACMA & BOEING METHODS)
|
|
ASTM.D0696.00
|
COEFFICIENT OF LINEAR THERMO EXPANSION OF PLASTICS, BETWEEN -30°C & 30°C, ASTM D696
|
QUARTZ-TUBE DIALTOMETER WITH DIAL GAUGE READ OUT.
|
|
ASTM.D0732.00
|
TEST METHOD FOR SHEAR STRENGTH OF PLASTICS BY PUNCH TOOL, ASTM D732
|
PUNCH SHEAR FIXTURE - 1.0 INCH DIAMETER PUNCH.
|
|
ASTM.D0747.00
|
APPARENT BENDING MODULUS OF PLASTIC BY MEANS OF A CANTILEVER BEAM, ASTM D747
|
BENDING MODULUS TESTING MACHINE FOR PLASTICS
|
|
ASTM.D0790.00
|
TEST METHOD FOR FLEXURAL PROPERTIES OF PLASTICS & ELEC. INSULATING MATERIALS, ASTM D790
|
2" WIDE - THREE POINT FLEXURE FIXTURE (SS) - UP TO 12" SPANS
|
|
2" WIDE - FOUR POINT FLEXURE FIXTURE (SS) - UP TO 12" SPANS, ADJUSTABLE FOUR POINT LOADING HEAD
|
|
2" WIDE - THREE & FOUR POINT FLEXURE FIXTURE (SS) - UP TO 12" SPANS
|
|
2" WIDE - THREE & FOUR POINT FLEXURE FIXTURE (SS) - UP TO 24" SPANS
|
|
ASTM.D0882.00
|
TENSILE PROPERTIES OF THIN PLASTIC SHEETING, ASTM D882
|
THIN SHEET TENSILE LINE GRIPS, 200 LB CAPACITY (CS)
|
|
ASTM.D0897.00
|
TEST METHOD FOR TENSILE PROPERTIES OF ADHESIVE BONDS, ASTM D897
|
TENSILE FLATWISE LOADING FIXTURE (SS) WITH FIVE SETS OF 1" SQUARE ALUMINUM LOADING BLOCKS .
|
|
ASTM.D0905.00
|
ADHESIVE BONDS IN SHEAR BY COMPRESSION LOADING, ASTM D905
|
COMPRESSION LOADING SHEAR FIXTURE WITH SELF-ADJUSTING BEARING (CS).
|
|
ASTM.D0926.00
|
PLASTICITY AND RECOVERY TESTING OF RUBBERS, ASTM D926
|
PARALLEL PLATE PLASTOMETER WITH DISPLACEMENT DIAL GAUGE
|
|
ASTM.D0952.00
|
METHOD FOR BOND OR COHESIVE STRENGTH OF SHEET PLASTICS & ELECTRICAL INSULATING, ASTM D952
|
FLATWISE TENSION LOADING FIXTURE - FIXED LOADING BLOCKS (ONE SET, ADAPTERS NOT INCLUDED) .
|
|
2" SQUARE FLATWISE TENSION LOADING FIXTURE - UNIVERSAL JOINT TYPE WITH 5 SETS OF BONDING BLOCKS .
|
|
2" SQUARE FLATWISE TENSION FIXTURE WITH 5 SET OF BONDING BLOCKS
|
|
ASTM.D0953.00
|
BEARING STRENGTH OF PLASTICS, ASTM D953
|
TYPE (1) TENSION LOADING BEARING STRENGTH FIXTURE, 0.125" DIAMETER BEARING PIN .(CS)
|
|
TYPE (2) TENSION LOADING BEARING STRENGTH FIXTURE, 0.250" DIAMETER BEARING PIN .(CS)
|
|
COMPRESSION LOADING BEARING STRENGTH FIXTURE, 0.125" & 0.250" DIAMETER BEARING PIN .
|
|
ASTM.D1037.00
|
METHOD FOR EVALUATING THE PROPERTIES OF WOOD-BASE FIBER & PARTICLE PANEL MATERIALS, ASTM D1037
|
STATIC THREE POINT BENDING FIXTURE - ADJUSTABLE SPAN UP TO 24" .
|
|
NAIL RESISTANCE TO LATERAL MOVEMENT FIXTURE - (1/16", 1/8", 3/16", 3/8", 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 2-1/4" WIDTHS) .
|
|
NAIL RESISTANCE TO DIRECT WITHDRAWAL FIXTURE .
|
|
FLATWISE TENSION FIXTURE WITH 5 SETS OF 2" SQUARE BONDING BLOCKS .(SS)
|
|
3" WIDE FLATWISE SHEAR FIXTURE WITH 3 SETS OF BONDING BLOCKS (SS) (COMPRESSION MODE) .
|
|
EDGEWISE SHEAR FIXTURE (TWO RAIL) .
|
|
ASTM.D1037.90
|
NAVY-TYPE WEAR MACHINE FOR ABRASION RESISTANCE TESTING .
|
ASTM.D1242.00
|
RESISTANCE OF PLASTIC MATERIALS TO ABRASION, ASTM D1242
|
LOOSE ABRASIVE ABRADING MACHINE
|
|
BONDED ABRASIVE ABRADING MACHINE
|
|
ASTM.D1414.00
|
METHODS OF TESTING RUBBER O-RINGS, ASTM D1414
|
TENSILE TESTING GRIPS FOR RUBBER RING SPECIMENS (NON-ROTATING SHAFTS)
|
|
TENSILE TESTING GRIPS FOR RUBBER RING SPECIMENS (ROTATING SHAFTS)
|
|
ASTM.D1593.00
|
NON RIGID VINYL CHLORIDE PLASTIC SHEETING, ASTM D1593
|
DROP ARM IMPACTOR FOR RIGID VINYL AT LOW-TEMPERATURES.
|
|
ASTM.D1623.00
|
TENSILE & TENSILE ADHESION OF RIGID CELLULAR PLASTICS, ASTM D1623
|
TENSILE GRIP ASSEMBLY FOR THE CONICAL RIGID CELLULAR PLASTIC SPECIMEN (TYPE A)
|
|
FLATWISE TENSION FIXTURE WITH 5 SETS OF BONDING BLACKS - 1" SQ. BONDING BLOCKS .
|
|
1 SET (2) OF BONDING BLOCKS - 1.5" SQ. BONDING BLOCKS
|
|
ASTM.D1693.00
|
ENVIRONMENTAL STRESS-CRACKING OF PLASTICS, ASTM D1693
|
NICKING JIG SYSTEM, TRANSFER TOOL, BENDING CLAMP AND SPECIMEN HOLDER
|
|
NICKING JIG SYSTEM, INCLUDING SPECIMEN GUIDES AND 10 NICKING BLADES
|
|
SPECIMEN HOLDER, (2) BRASS CHANNEL HOLDERS, (2) TEST TUBES, (2) CORKS, ALUMINUM FOIL, TEST TUBE RACK
|
|
BENDING CLAMP, 10 POSITION GUIDED BENDING FIXTURE.
|
|
TRANSFER TOOL ASSEMBLY, POSITIVE LOCK HOLDS SPECIMEN IN PLACE .
|
|
ASTM.D1775.00
|
TENSION AND ELONGATION OF WIDE ELASTIC FABRICS, ASTM D1775
|
CYCLIC ELASTIC TESTER - STROKE BETWEEN 0 TO 8"
|
|
ASTM.D1781.00
|
METHOD FOR CLIMBING DRUM PEEL TEST FOR ADHESIVES, ASTM D1781
|
CLIMBING DRUM PEEL FIXTURE WITH KNURLED ROLLER STYLE SPECIMEN GRIPS (SS WITH ALUMINUM DRUM).
|
|
CLIMBING DRUM PEEL FIXTURE WITH FLAT STYLE SPECIMEN GRIPS (SS WITH ALUMINUM DRUM).
|
|
CLIMBING DRUM PEEL FIXTURE WITH FLAT STYLE SPECIMEN GRIPS (ALL STAINLESS STEEL)
|
|
ASTM.D1893.00
|
TEST METHOD FOR BLOCKING OF PLASTIC FILMS, ASTM D1893
|
BRASS AND ALUMINUM PEEL BAR FRAME
|
|
ASTM.D1894.00
|
TEST METHOD FOR STATIC & KINETIC COEFFICIENTS OF FRICTION OF PLASTIC FILM & SHEETING, ASTM D1894
|
HORIZONTAL PLANE COEFFICIENT OF FRICTION FIXTURE - (AL) WITH SLED ATTACHED TO CROSS HEAD BY WIRE AND PULLEY
|
|
INCLINED PLANE COEFFICIENT OF FRICTION FIXTURE - 0 TO 90 DEGREES
|
|
PEEL TESTING MACHINE (90 & 180 DEG.) /(12",30",60",300",600"&1200"/MIN.)(16 INCH STROKE)
|
|
ASTM.D2105.00
|
TEST METHOD FOR LONGITUDINAL TENSILE PROPERTIES OF FIBERGLASS PIPE AND TUBE, ASTM D2105
|
LONGITUDINAL TENSILE TEST FIXTURE ASSEMBLY FOR FIBERGLASS PIPE (50MM DIAMETER)
|
|
ASTM.D2290.00
|
TENSILE STRENGTH OF RING OR TUBULAR PLASTICS & REINFORCED PLASTICS BY SPLIT DISK METHOD, ASTM D2290
|
PARALLEL FIBER 5.75" SPLIT DISK FIXTURE (SS)- AS SHOWN IN ASTM D2290
|
|
EXTRUDED RING, SPLIT DISK FIXTURE - ONE SET OF LOADING DEE'S INCLUDED, BETWEEN 1" AND 12"
|
|
EXTRUDED RING, SPLIT DISK FIXTURE - ONE SET OF LOADING DEE'S INCLUDED, BETWEEN 12" AND 24"
|
|
EXTRUDED RING, SPLIT DISK FIXTURE - ONE SET OF LOADING DEE'S INCLUDED, BETWEEN 1" AND 12"
|
|
ASTM.D2344.00
|
APPARENT INTERLAMINAR SHEAR STRENGTH OF PARALLEL FIBER COMPOSITES BY SHORT BEAM METHOD, ASTM D2344
|
SHORT BEAM SHEAR FIXTURE - ADJUSTABLE SUPPORTS (SS)
|
|
SHORT BEAM SHEAR FIXTURE - ADJUSTABLE SUPPORTS - LEAD SCREW MOVEMENT ON SUPPORTS (SS)
|
|
ASTM.D2718.00
|
METHOD FOR STRUCTURAL PANELS IN PLANAR SHEAR (ROLLING SHEAR) , ASTM D2718
|
PLYWOOD FLATWISE SHEAR TEST FIXTURE (6" BY 18" SPECIMEN)
|
|
ASTM.D2719.00
|
METHOD FOR STRUCTURAL PANELS IN SHEAR THROUGH-THE-THICKNESS , ASTM D2719
|
SMALL PANEL-SHEAR SPECIMEN FIXTURE
|
|
LARGE PANEL-SHEAR SPECIMEN FIXTURE - PICTURE FRAME .
|
|
TWO RAIL SHEAR FIXTURE FOR PLYWOOD
|
|
ASTM.D2861.00
|
METHOD OF TESTING FLEXIBLE COMPOSITES OF COPPER FOIL WITH DIELECTRIC FILM OR TREATED FABRICS, ASTM D2861
|
CONSTANT ANGLE PEEL FIXTURE
|
|
DRUM-TYPE PEEL STRENGTH FIXTURE - ASTM D2861, METHOD C
|
|
ASTM.D2990.00
|
TEST METHODS FOR TENSILE , COMPRESSIVE, & FLEXURAL CREEP & CREEP RUPTURE OF PLASTICS, ASTM D2990
|
(6) POSITION TENSILE CREEP TESTING STAND - 400 LB. CAP. - DEAD WEIGHT
|
|
(12) POSITION TENSILE CREEP TESTING STAND - 400 LB. CAP. - DEAD WEIGHT
|
|
TENSILE CREEP TESTING STAND - 5,000 LB. CAP. - 10-1 MULTIPLIER
|
|
TENSILE CREEP TESTING STAND - 15,000 LB. CAP. - 15-1 MULTIPLIER
|
|
Creep compression cage - for any tensile creep stand, up to 3" sq. or 2.5" round
|
|
20 pound slotted creep stand weight (CALIBRATED ± 0.001 LBF)
|
|
10 pound slotted creep stand weight (CALIBRATED ± 0.001 LBF)
|
|
5 pound slotted creep stand weight (CALIBRATED ± 0.001 LBF)
|
|
1 pound slotted creep stand weight (CALIBRATED ± 0.001 LBF)
|
|
(6) POSITION FLEXURE CREEP TESTING STAND, BOTTOM LOADING - DEAD WEIGHT
|
|
(12) POSITION TENSILE CREEP TESTING STAND, BOTTOM LOADING - DEAD WEIGHT
|
|
(2) POSITION ENVIRONMENTAL FLEXURE CREEP SYSTEM - PNEUMATIC LOADING
|
|
ASTM.D3029.00
|
IMPACT RESISTANCE OF FLAT RIGID PLASTIC SPECIMENS BY MEANS OF A TUP (FALLING WEIGHT) , ASTM D3029
|
FREE FALLING DROP WEIGHT IMPACTOR WITH 3 DIFFERENT DIAMETER MOVABLE CLAMPS, INCLUDING THREE IMPACT HEADS
|
|
ASTM.D3039.00
|
TEST METHOD FOR TENSILE PROPERTIES OF POLYMER MATRIX COMPOSITE MATERIALS , ASTM D3039
|
ASTM D3039 specimen fabrication fixture, fabricate 0°, 90° and crossply specimen configurations per ASTM D3039.
|
|
Precut specimen tabbing materials (balanced cross-ply composite & aluminum).
|
|
ASTM.D3043.00
|
METHOD OF TESTING STRUCTURAL PANELS IN FLEXURE, ASTM D3043
|
4.5" WIDE, 24" ADJUSTABLE SPAN, THREE POINT STATIC BENDING TEST FIXTURE (CS)
|
|
4.5" WIDE, 72" ADJUSTABLE SPAN, THREE POINT STATIC BENDING TEST FIXTURE (CS)
|
|
4.5" WIDE, 120" ADJUSTABLE SPAN, THREE POINT STATIC BENDING TEST FIXTURE (CS)
|
|
FLEXURE FIXTURE - AS SHOWN IN ASTM.D3043, FIG. 4
|
|
ASTM.D3044.00
|
TEST METHOD FOR SHEAR MODULUS OF WOOD BASED STRUCTURAL PANEL, ASTM.D3044
|
SADDLE SHEAR MODULES FIXTURE - AS SHOWN IN ASTM.D3044 .
|
|
ASTM.D3167.00
|
TEST METHOD FOR FLOATING ROLLER PEEL RESISTANCE OF ADHESIVES, ASTM D3167
|
FLOATING ROLLER PEEL RESISTANCE FIXTURE (7/8" WIDE SPECIMEN).
|
|
FLOATING ROLLER PEEL RESISTANCE FIXTURE (1.5" WIDE SPECIMEN)
|
|
FLOATING ROLLER PEEL RESISTANCE FIXTURE (6" WIDE SPECIMEN)..
|
|
ASTM.D3330.00
|
TEST METHOD FOR PEEL ADHESION OF PRESSURE SENSITIVE TAPES AT 180° ANGLE, ASTM D3330
|
ASTM.D3330.10
|
180° PEEL TEST FIXTURE FOR SMALL SPECIMENS UP TO 2" WIDE AND 5" LONG
|
ASTM.D3330.11
|
180° PEEL TEST FIXTURE FOR LARGE SPECIMENS UP TO 3" WIDE AND 10" LONG
|
ASTM.D3410.00
|
COMPRESSIVE PROPERTIES OF POLYMER MATRIX COMPOSITES BY SHEAR LOADING , ASTM D3410
|
Precut specimen tabbing materials (balanced cross-ply composite & aluminum) .
|
|
IITRI COMPRESSION LOADING FIXTURE - UP TO 1-1/2" WIDE & UP TO 3/4" THICK SPECIMENS(S.S. & C.S.)
|
|
IITRI COMPRESSION LOADING FIXTURE - UP TO 1-1/2" WIDE & UP TO 3/4" THICK SPECIMENS(S.S.) .
|
|
MODIFIED IITRI COMPRESSION LOADING FIXTURE - 1/4" WIDE & UP TO 1/4" THICK SPECIMENS(S.S. & C.S.) .
|
|
MODIFIED IITRI COMPRESSION LOADING FIXTURE - 1/4" WIDE & UP TO 1/4" THICK SPECIMENS(S.S.) .
|
|
500°F wafer oven with proportional controller
|
|
800°F wafer oven with proportional controller .
|
|
Precut specimen tabbing materials (balanced crossply composite or aluminum) .
|
|
ASTM.D3410.00
|
COMPRESSIVE PROPERTIES OF COMPOSITES, SANDWICH BEAM METHOD , ASTM D3410.C
|
SANDWICH BEAM COMPRESSION LOADING FIXTURE - 30" ADJUSTABLE SPAN - ADJUSTABLE FOUR POINT LOADING HEAD (S.S.) . .
|
|
SANDWICH BEAM COMPRESSION FIXTURE FULLY ARTICULATING LOWER SUPPORT SWIVELS & GUIDED HEAD
|
|
ASTM.D3574.00
|
METHOD OF TESTING FLEXIBLE CELLULAR MATERIALS SLAB, BONDED & MOLDED URETHANE, ASTM D3574
|
INDENTATION FORCE DEFLECTION TEST FIXTURE WITH 16 SQUARE LOADING PLATE AND 50 SQ-IN CIRCULAR INDENTER FOOT .
|
|
ASTM.D3575.00
|
METHOD OF TESTING FLEXIBLE CELLULAR MATERIALS MADE FROM OLEFIN POLYMERS, ASTM D3575
|
DEAD WEIGHT CREEP STAND .
|
|
ASTM.D3787.00
|
METHOD OF BURST STRENGTH OF KNITTED GOODS (CRT) BALL BURST TEST, ASTM D3787
|
BURST STRENGTH FIXTURE FOR KNITTED GOODS
|
|
BURST STRENGTH FIXTURE FOR KNITTED GOODS - WITH PNEUMATIC CYLINDER AND VALVE
|
|
ASTM.D3846.00
|
IN-PLANE SHEAR STRENGTH OF REINFORCED PLASTICS, ASTM D3846
|
COMPRESSION ANTI-BUCKLING FIXTURE
|
|
ASTM.D3916.00
|
TENSILE PROPERTIES OF PULTRUDED GLASS-FIBER-REINFORCED PLASTIC RODS, ASTM D3916
|
ROD CLAMPING FIXTURE (ANY SIZE FROM 1/8" TO 1/2") .
|
|
ROD CLAMPING FIXTURE (ANY SIZE FROM 1/2" TO 1.0") .
|
|
ASTM.D4027.00
|
MEASURING SHEAR PROPERTIES OF STRUCTURAL ADHESIVES BY MODIFIED-RAIL TEST, ASTM D4027
|
MODIFIED-RAIL SHEAR FIXTURE, ASTM D4027
|
|
ASTM.D4123.00
|
INDIRECT TENSION TEST FOR RESILIENT MODULUS OF BITUMINOUS MIXTURES, ASTM D4123
|
INDIRECT TENSILE TEST FIXTURE WITH GUIDED INTERCHANGEABLE RADIUS LOADING POINTS, ASTM D4123
|
|
ASTM.D4226.00
|
IMPACT RESISTANCE OF RIGID POLY BUILDING PRODUCTS, ASTM D4226
|
DROP WEIGHT IMPACTOR WITH 60" SCALED SLIDE GUIDE - IMPACTOR HOLDER .
|
|
ASTM.D4255.00
|
GUIDE FOR TESTING IMPLANE SHEAR PROPERTIES OF COMPOSITE LAMINATES, RAIL SHEAR, ASTM D4255
|
TWO RAIL SHEAR FIXTURE TENSILE MODE (S.S.)
|
|
TWO RAIL SHEAR FIXTURE COMPRESSION MODE (S.S)
|
|
TWO RAIL SHEAR FIXTURE TENSILE MODE (C.S.).
|
|
TWO RAIL SHEAR FIXTURE COMPRESSION MODE (C.S)
|
|
ASTM.D4475.00
|
HORIZONTAL SHEAR STRENGTH OF PULTRUDED REINFORCED PLASTIC RODS, ASTM D4475
|
SHORT BEAM FLEXURE FIXTURE FOR PULTRUDED REINFORCED PLASTIC
|
|
ASTM.D4476.00
|
FLEXURAL PROPERTIES OF PULTRUDED REINFORCED PLASTIC RODS, ASTM D4476
|
FLEXURE FIXTURE FOR PULTRUDED REINFORCED PLASTIC
|
|
ASTM.D4501.00
|
SHEAR STRENGTH OF ADHESIVE BONDS FOR RIGID SUBSTRATES, ASTM D4501
|
SHEAR LOADING FRAME FIXTURE (CS)
|
|
ASTM.D4649.00
|
PROTRUSION PUNCTURE METHOD FOR SELECTION OF STRETCH WRAP MATERIALS, ASTM D4649
|
PROTRUSION PUNCTURE FIXTURE (COMPRESSION MODE) (AL)
|
|
PROTRUSION PUNCTURE FIXTURE (PNEUMATIC COMPRESSION MODE) (AL)
|
|
ASTM.D4680.00
|
CREEP AND TIME TO FAILURE FOR ADHESIVE IN STATIC SHEAR (WOOD), ASTM D4680
|
CREEP AND STRESS RUPTURE TEST FIXTURE FOR BONDED WOOD SPECIMENS .
|
|
ASTM.D5379.00
|
IOSIPESCU SHEAR, PURE SHEAR OF COMPOSITE MATERIALS, ASTM D5379
|
V-NOTCHED BEAM (IOSIPESCU SHEAR) FIXTURE - ADJUSTABLE WEDGES STYLE (SS)
|
|
V-NOTCHED BEAM (IOSIPESCU SHEAR) FIXTURE - ADJUSTABLE WEDGES STYLE (CS)
|
|
ASTM.D5467.00
|
COMPRESSIVE PROPERTIES OF COMPOSITES, SANDWICH BEAM METHOD , ASTM D5467
|
SANDWICH BEAM COMPRESSION LOADING FIXTURE - 30" ADJUSTABLE SPAN - ADJUSTABLE FOUR POINT LOADING HEAD (S.S.) . .
|
|
ASTM.D5748.00
|
PROTRUSION PUNCTURE METHOD FOR SELECTION OF STRETCH WRAP MATERIALS, ASTM D5748
|
PROTRUSION PUNCTURE FIXTURE WITH TEFLON COATED PROBE
|
|
ASTM.D5766.00
|
OPEN HOLE TENSILE STRENGTH OF POLYMER MATRIX COMPOSITE LAMINATES , ASTM D5766
|
20 KIP WEDGE ACTION GRIPS, 2" WIDE GRIP FACES (COMPOSITE MATERIALS) .
|
|
Precut specimen tabbing materials (balanced cross-ply composite & aluminum).
|
|
ASTM.D5961.00
|
METHOD FOR BEARING RESPONSE OF POLYMER METRIX COMPOSITE LAMINATES, ASTM D5961
|
DOUBLE SHEAR BEARING STRENGTH TEST FIXTURE (SS)
|