Material Testing Technology Co. | home
ASTM A Test Fixtures | ASTM B Test Fixtures | ASTM C Test Fixtures | ASTM D Test Fixtures | ASTM E Test Fixtures | ASTM F Test Fixtures | ASTM G Test Fixtures
ASTM C Test Fixtures
Model No
|
Description
|
ASTM.C0134.00
|
SIZE, DIMENSIONAL MEASUREMENTS, AND BULK DENSITY OF REFRACTORY BRICK AND INSULATING FIREBRICK, ASTM C134
|
WARPAGE MEASURING WEDGE
|
|
|
|
ASTM.C0158.00
|
STRENGTH OF GLASS BY FLEXURE (MODULUS OF RUPTURE), ASTM C158
|
THREE AND FOUR POINT FULLY ARTICULATED FLEXURE FIXTURE WITH RADIUS SUPPORTS (AL).
|
|
|
|
ASTM.C0203.00
|
BREAKING LOAD AND FLEXURAL PROPERTIES OF BLOCK-TYPE THERMAL INSULATION
|
3 Point Flexure Fixture for Block-Type Insulation
|
|
|
|
ASTM.C0273.00
|
SHEAR TEST IN FLATWISE PLANE OF FLAT SANDWICH CONSTRUCTIONS OR SANDWICH CORE, ASTM C273
|
FLATWISE PLANE SHEAR FIXTURE (SS) WITH THREE SETS OF BONDING PLATES (CS) or (AL) (TENSILE MODE) .
|
|
FLATWISE PLANE SHEAR FIXTURE (SS) WITH THREE SETS OF BONDING PLATES (CS) or (AL) (COMPRESSION MODE) .
|
|
FLATWISE PLANE SHEAR FIXTURE (CS) WITH THREE SETS OF BONDING PLATES (CS) or (AL) (TENSILE MODE) .
|
|
FLATWISE PLANE SHEAR FIXTURE (CS) WITH THREE SETS OF BONDING PLATES (CS) or (AL) (COMPRESSION MODE) .
|
|
Additional aluminum bonding substrate plates with flat bonding surface (AL) (per set) (tensile mode) .
|
|
Additional aluminum bonding substrate plates with flat bonding surface (AL) (per set) (compression mode)
|
|
Additional steel bonding substrate plates with ground flat bonding surface (CS) (per set) (tensile mode)
|
|
Additional steel bonding substrate plates with ground flat bonding surface (CS) (per set) (compression mode)
|
|
Additional stainless steel bonding substrate plates with ground flat bonding surface (SS) (per set) (tensile mode) .
|
|
Additional stainless steel bonding substrate plates with ground flat bonding surface (SS) (per set) (compression mode)
|
|
|
|
ASTM.C0297.00
|
FLATWISE TENSILE STRENGTH OF FLAT CONSTRUCTIONS IN FLATWISE PLANE, ASTM C297
|
FLATWISE TENSION FIXTURE (SS) WITH 5 SETS OF BONDING BLOCKS - 1" SQ. BONDING BLOCKS (AL) - UNIVERSAL JOINT TYPE .
|
|
FLATWISE TENSION FIXTURE (SS) WITH 5 SETS OF BONDING BLOCKS - 2" SQ. BONDING BLOCKS (AL) - UNIVERSAL JOINT TYPE.
|
|
FLATWISE TENSION FIXTURE (SS) WITH 5 SETS OF BONDING BLOCKS - 2" DIA. BONDING BLOCKS (AL) - SPHERICAL SEAT TYPE .
|
|
1" square additional aluminum bonding substrate blocks with flat bonding surface (Aluminum) (per set) .
|
|
1" square additional steel with black oxide coating bonding substrate blocks with flat bonding surface (Steel) (per set) .
|
|
1" square additional stainless steel bonding substrate blocks with flat bonding surface (Stainless steel) (per set) .
|
|
2" square additional aluminum bonding substrate blocks with flat bonding surface (Aluminum) (per set)
|
|
2" square additional steel with black oxide coating bonding substrate blocks with flat bonding surface (Steel) (per set)
|
|
2" square additional stainless steel bonding substrate blocks with flat bonding surface (SS) (per set) .
|
|
2" round additional aluminum bonding substrate blocks with flat bonding surface (Aluminum) (per set) .
|
|
2" round additional steel with black oxide coating bonding substrate blocks with flat bonding surface (Steel) (per set) . .
|
|
2" round additional stainless steel bonding substrate blocks with flat bonding surface (SS) (per set) .
|
|
|
|
ASTM.C0307.00
|
TENSILE STRENGTH OF CHEMICAL-RESISTANT MORTAR, GROUTS MONOLITHIC SURFACINGS, ASTM C307
|
BRIQUET SPECIMEN TENSILE GRIPS FOR MORTAR, GROUTS AND MONOLITHIC MATERIALS. (SS)
|
|
BRIQUET SPECIMEN TENSILE GRIPS FOR MORTAR, GROUTS AND MONOLITHIC MATERIALS. (CS)
|
|
3 cavity briquet gang mold, 1 in thick specimens .
|
|
|
|
ASTM.C0364.00
|
EDGEWISE COMPRESSIVE STRENGTH OF FLAT SANDWICH CONSTRUCTIONS, ASTM C364
|
EDGEWISE COMPRESSION FIXTURE WITH 4" SELF-ALIGNING "V" NOTCH SPHERICAL SEAT & 5 SETS OF SPECIMEN CAPS .
|
|
|
|
ASTM.C0365.00
|
FLATWISE COMPRESSIVE STRENGTH OF SANDWICH CORES, ASTM C365
|
6" SELF-ALIGNING SPHERICAL SEAT COMPRESSION PLATEN .
|
|
6" DIAMETER COMPRESSION PLATEN WITH 12" LONG SUPPORT CYLINDER FOR LVDT TESTING (LVDT NOT INCLUDED)
|
|
|
|
ASTM.C0393.00
|
FLEXURAL PROPERTIES OF FLAT SANDWICH CONSTRUCTIONS, ASTM C393
|
SANDWICH BEAM FLEXURE / SHEAR FIXTURE (SS) - UP TO 12" SPANS .
|
|
SANDWICH BEAM FLEXURE / SHEAR FIXTURE (CS) - UP TO 12" SPANS .
|
|
SANDWICH BEAM FLEXURE / SHEAR FIXTURE (CS) - UP TO 24" SPANS.
|
|
SANDWICH BEAM FLEXURE / SHEAR FIXTURE (CS) - 7 TO 30" SPANS, 4" WIDE
|
|
SANDWICH BEAM FLEXURE / SHEAR FIXTURE (CS) - UP TO 30" SPANS, 5" WIDE
|
|
Neutral axis mid-span displacement gauge for sandwich construction flexure testing
|
|
|
|
ASTM.C0469.00
|
STATIC MODULUS OF ELASTICITY AND POISSON'S RATIO OF CONCRETE IN COMPRESSION, ASTM C469
|
SPECIMEN COMPRESSOMETER
|
|
DIAMETRAL CONCRETE SPECIMEN EXTENSOMETER
|
|
|
|
ASTM.C0480.00
|
FLEXURE-CREEP OF SANDWICH CONSTRUCTIONS, ASTM C480
|
SANDWICH FLEXURE CREEP MACHINE FOR SANDWICH CONSTRUCTIONS
|
|
|
|
ASTM.C0512.00
|
CREEP OF CONCRETE IN COMPRESSION, ASTM C512
|
10,000 POUND CAPACITY - SPRING LOADED CREEP STAND
|
|
30,000 POUND CAPACITY - SPRING LOADED CREEP STAND
|
|
60,000 POUND CAPACITY - SPRING LOADED CREEP STAND
|
|
100,000 POUND CAPACITY - SPRING LOADED CREEP STAND
|
|
150,000 POUND CAPACITY - SPRING LOADED CREEP STAND
|
|
200,000 POUND CAPACITY - SPRING LOADED CREEP STAND
|
|
250,000 POUND CAPACITY - SPRING LOADED CREEP STAND
|
|
|
|
ASTM.C0633.00
|
ADHESIVE OR COHESIVE STRENGTH OF FLAME-SPRAYED COATINGS, ASTM C633
|
FLATWISE TENSION FIXTURE (SS) WITH 5 SETS OF BONDING BLOCKS - 1" SQ. BONDING BLOCKS (CS) - UNIVERSAL JOINT TYPE .
|
|
|
|
ASTM.C0947.00
|
FLEXURAL PROPERTIES OF THIS-SECTION GLASS-FIBER-REINFORCED CONCRETE, ASTM C947
|
2" WIDE FULLY ARTICULATING - FOUR POINT FLEXURE FIXTURE (SS) - UP TO 12" SPANS
|
|
4" WIDE FULLY ARTICULATING - FOUR POINT FLEXURE FIXTURE (SS) - UP TO 24" SPANS
|
|
12" WIDE FULLY ARTICULATING - FOUR POINT FLEXURE FIXTURE (SS) - UP TO 12" SPANS
|
|
|
|
ASTM.C1135.00
|
TENSILE ADHESION PROPERTIES OF STRUCTURAL SEALANTS, ASTM C1135
|
FLATWISE TENSION ADHESION FIXTURE WITH FIVE SETS OF GLASS BONDING PLATES
|
|
EXTRA PTFE SPACER TO COMPLETE SEALANT MOLD ASSEMBLY
|
|
EXTRA SET OF TWO (2) GLASS BONDING PLATES
|
|
|
|
ASTM.C1161.00
|
FLEXURAL STRENGTH OF ADVANCED CERAMICS AT AMBIENT TEMPERATURE, ASTM C1161
|
1" WIDE 7" SPAN FULLY ARTICULATING THREE & FOUR POINT FLEXURE FIXTURE WITH 0.25" LOADING PINS (SS)
|
|
1" WIDE 7" SPAN FULLY ARTICULATING THREE & FOUR POINT FLEXURE FIXTURE WITH 4.5MM LOADING PINS (AL)
|
|
1" WIDE 7" SPAN FULLY ARTICULATING THREE & FOUR POINT FLEXURE FIXTURE WITH 4.5MM LOADING PINS (CS)
|
|
1" WIDE 7" SPAN FULLY ARTICULATING THREE & FOUR POINT FLEXURE FIXTURE WITH 0.25" LOADING PINS (INCONEL 718)
|